Overview

Considering an apprenticeship? Lay a strong foundation with a Certificate II in Building and Construction Pre-apprenticeship – Bricklaying. This course covers both theory and practical training, equipping you with the skill-set to work safely in the building and construction industry. You’ll develop the knowledge and skills to build all types of structures, or even be your own boss. Graduate equipped with the skills and knowledge employers look for.

Four credits are available in this course that contribute to the Certificate III in Bricklaying and Blocklaying.

This is a nationally approved vocational course that is recognised throughout Australia.

  • Nationally recognised training
    Nationally recognised training
  • TAFE Victoria
    TAFE Victoria
Looking to start in Semester 1, 2025?

Whatever stage you're at – from browsing courses to starting an application – our Study Expo is your one-stop-shop for info and advice.

Skills you’ll learn

  • Apply a variety of Bricklaying and Blockwork Techniques
  • Apply OHS requirements, policies and procedures in the construction industry
  • Carry out measurements and calculations
  • Apply basic levelling procedures
  • Interpret and apply basic plans and drawings
  • Erect and Safely use Working Platforms

Your career opportunities

  • Apprentice Bricklayer
  • Apprentice Blocklayer

Location options

Admissions

Satisfactory completion of an appropriate Victorian Year 10 or equivalent. Applicants who have not completed Year 10 or equivalent may provide additional information such as a CV (including relevant work experience) to support their application.

Admission requirements

Meeting the minimum entry requirements for the course does not guarantee an offer of a place. See admission requirements for general information about the admission process.

English language requirements

Satisfactory completion of one of the following:

Need to undertake an English assessment for entry?

A prerequisite for many courses, the Pearson Test of English (PTE Academic) can now be done at our Hawthorn campus.

Credit transfer

Credit transfer is the recognition of academic credits gained through formal study (i.e. units of competency) completed either at another institute or in another qualification. The total amount of credit will vary from individual to individual, based on the unit/s that have been successfully completed. 

Recognition of prior learning

Recognition of Prior Learning (RPL) is the process of transferring the skills and knowledge that you have acquired over your lifetime (irrespective of how they were obtained) against the requirements of the unit.  

RPL is an assessment process that requires you to provide evidence that demonstrates how you meet the requirements of the unit/s. The amount and types of evidence you will need to provide will depend on the unit requirements.

Finding your fit

At Swinburne, we recognise that not one size fits all. If this course doesn’t meet all your study criteria, check out these alternatives.

Course structure

The course contains 14 units of competency and aligns to the Victorian curriculum packages. Delivery of the program is primarily face-to-face, with theoretical and practical training. Students will develop a range of skills and produce live work from the program.

8
Core units
+
6
Elective units
=
Certificate II

Indicative nominal course hours: 613.

Your units

Units of study Unit code
Core units
Prepare to work safely in the construction industry
Core unit, 6.0 credit points
CPCCWHS1001
Apply WHS requirements, policies and procedures in the construction industry
Core unit, 20.0 credit points
CPCCWHS2001
Provide basic emergency life support
Core unit, 12.0 credit points
HLTAID010
Conduct workplace communication
Core unit, 20.0 credit points
CPCCOM1014
Carry out measurements and calculations
Core unit, 20.0 credit points
CPCCOM1015
Apply basic levelling procedures
Core unit, 8.0 credit points
CPCCCM2006
Prepare for work in the building and construction industry
Core unit, 18.0 credit points
VU23312
Interpret and apply basic plans and drawings
Core unit, 25.0 credit points
VU23313
Units of study Unit code
Elective units
Erect and safely use working platforms
Elective unit, 24.0 credit points
VU23314
Apply masonry blockwork techniques
Elective unit, 50.0 credit points
VU23319
Apply cavity brick construction techniques
Elective unit, 80.0 credit points
VU23318
Apply brick veneer construction techniques
Elective unit, 80.0 credit points
VU23317
Identify and handle bricklaying tools and equipment
Elective unit, 76.0 credit points
VU23315
Apply basic bricklaying techniques
Elective unit, 126.0 credit points
VU23316

2024 fees

Full fee* ($AUD)

$8,660

Skills first government-subsidised place* ($AUD)

$2,070

2024 fees

Fees are estimates only

Fees published on this page are estimates only and are subject to change depending on individual circumstances at the time of enrolment. The above fees apply for units studied in 2024 only and may change for units studied in future years. There may be additional costs related to learning material and equipment.

Fees are estimates only

The indicative course fees shown apply to international students for the relevant year only. They are based on a standard study load per year. However, please note that fees are assessed according to a student's study load in each semester, and variation to study load will result in an adjustment to tuition fees. International tuition fees are generally inclusive of Student Services and Amenities Fee (SSAF). All fees are subject to annual review and may be adjusted.

Skills first government-subsidised place

This training is delivered with Victorian and Commonwealth Government funding. To qualify for a government-subsidised place, you must meet various eligibility criteria. The course you’ve applied for must also be offering government-subsidised places. Swinburne will determine your eligibility by conducting a full assessment of your eligibility during the course application process.

How do I pay my fees?

You can pay your Swinburne fees in person, via credit card, BPAY, or at Australia Post. Check to see if loans and employer sponsored training are also available.

International students need to pay tuition fees up-front by the relevant due date. You can find the due dates on your Statement of Account.

To pay your fees:

  • log in to My Financials
  • check your Australian bank account details are correct 
  • check your Statement of Account to see how much you owe 
  • pay using your preferred payment method.

Concessions rates for vocational students

If you’re enrolling in a Certificate IV-level program or below, are eligible for a government-subsidised training place and hold a valid concession card, you may be eligible for a concession of 80 per cent off the published fee of your unit(s) tuition – which means you’ll only be charged 20 per cent of the published fee.

  • Portrait   Female Nurse  Scrubs  Hospital Work  Smiling  Happy  Clipboard

    Study this course for free in 2024

    You could have your tuition fees covered in 2024 thanks to the Victorian Government's Free TAFE for Priority Courses initiative. 

    Free TAFE for Priority Courses is available to any Australian citizen, permanent resident or New Zealand citizen.

    There are other factors, too. The best way to find out if you’re eligible is to apply!

Scholarships

Scholarship applications for 2024 are open. Scholarships at Swinburne are about providing opportunity, promoting equity and recognising excellence and achievement. We want you to reach your potential and achieve your life and career goals. 

Our handy guide will assist you to gather documents for your application.

When you apply for a Swinburne course, we automatically consider you for an international scholarship of up to 30 per cent off your course fees – no separate application required! Just apply for your Swinburne course of choice and when we review your course application, we will also assess you for an international scholarship.

Apply through an agent

Most international students use an education agent to help them through the application process. Swinburne has agents all over the world that can help you with your application to study. Search for a Swinburne representative in your country. If your country is not listed, please contact us.

Representatives and agents
22614VIC
Search for agents

Apply directly

Ready to take on a new challenge and reach your academic goals? If you already know which course you want to study and understand the entry requirements, what are you waiting for? Apply online! Remember, you cannot apply direct if you have an active VTAC application.

Start dates
Location
Last date to apply
Start dates
VET Feb Intake
Location
Wantirna
Last date to apply
03-February-2025
Start dates
03-February-2025
VET Apr Intake
Location
Wantirna
Last date to apply
07-April-2025
Start dates
07-April-2025
VET Jul Intake
Location
Wantirna
Last date to apply
07-July-2025
Start dates
07-July-2025
VET Oct Intake
Location
Wantirna
Last date to apply
06-October-2025
Start dates
06-October-2025
Start dates
Location
Start dates
VET Feb Intake
Location
Wantirna
Start dates
03-February-2025
VET Apr Intake
Location
Wantirna
Start dates
07-April-2025
VET Jul Intake
Location
Wantirna
Start dates
07-July-2025
VET Oct Intake
Location
Wantirna
Start dates
06-October-2025
Upcoming events
2025 Study Expo
12-November-2024