Skip to Content

Dr. Daeyong Seong   Research Engineer

Profile Photo
Areas:
Australian Advanced Manufacturing Research Centre
Office:
ATC739
Phone:
+61 3 9214 4942
Fax:
+61 3 9214 8264
E-Mail:
dseong@swin.edu.au
Campus:
Hawthorn
Faculty of Engineering & Industrial Sciences (H38)
Swinburne University of Technology
PO Box 218
Hawthorn, Victoria, 3122
Australia

Research Projects

  • Advanced Micro–Replication Manufacturing System, Ministry of Knowledge Economy(MKE), South Korea, 2003,8,18 ~ 2006, 5,31
  • Development of Ultralight Metal Sandwich Plate with 3–Dimensional Inner Structures, Ministry of Knowledge Economy(MKE), South Korea, 2006,6,1 ~ 2008, 8,31
  • Evaluation of the bending limit of double pipe for tube–hydroforming and fundamental research on the development of new bending process, POSCO, South Korea, 2006, 6, 1 ~ 2007, 5, 31
  • Development of Functionally Controlled Material (FCM) by layered cellular manufacturing, KAIST HRHRP, 2008, 8, 1 ~ 2009, 7, 31
  • Development of Multi–Directional Roll Forming Process, POSCO, South Korea, 2008, 11, 20 ~ 2010,2
  • Modelling of Multipass Hot and Cold Rolling Processes (Phase–I), Hyundai, 2011, 3 ~ 2011, 8.

Patents

  • Manufacturing Method of Sandwich Type Panel and Manufacturing Metal Mold Set, 0730572, South Korea, 2007.06.
  • Variable Sandwich Panel Using Bi–directional Corrugated Inner Structure and Manufacturing Method thereof, 0686972, South Korea, 2007.03.
  • Deformable Sandwich Panel Having Sheared Inner Structure And Manufacturing Method Thereof , 0738501, South Korea, 2007. 04.
  • Deformable Sandwich Panel Using Bended Truss Core and Manufacturing Method thereof, 0760312, South Korea, 2007. 07.
  • Sandwich tube and curved sandwich plate using expanded metal and manufacturing method thereof, 0856425, South Korea, 2008.08.28

International Journal Papers

  1. D.Y. Seong, C.G. Jung, D.Y. Yang, D.G. Ahn, “Bending behavior of simply supported metallic sandwich plates with dimpled cores”, International Journal of Modern Physics B, 22, 6179–6184, 2008.
  2. C. G. Jung, D. Y. Seong, D. Y. Yang, S. J. Na, D. G. Ahn, “Development of a continuous fabrication system for a metallic sandwich plate with a three–dimensional truss core”, Int J Adv Manuf Technol, 45, 352–361, 2009.
  3. D.Y. Seong, C.G. Jung, D.Y. Yang, J.H. Kim, W.J. Chung, M.Y. Lee, “Bendable metallic sandwich plates with a sheared dimple core”, Scripta Materialia, 63, 81–84, 2010.
  4. D.Y. Seong, C.G. Jung, D.Y. Yang, J. Ahn, S.J. Na, W.J. Chung, J.H. Kim, “Analysis of core shear stress in welded deformable sandwich plates to prevent de–bonding failure during U–bending”, Journal of Materials Processing Technology, 210, 1171–1179, 2010.
  5. D.Y. Seong, C.G. Jung, D.Y. Yang, K.J. Moon, D.G. Ahn, “Quasi–isotropic bending responses of metallic sandwich plates with bi–directionally corrugated cores”, Materials and Design, 31, 2804–2812, 2010.
  6. W.J. Chung, S.J Lim, J.H. Kim, D.Y. Seong, D.Y. Yang, “Forming Analysis of L–Bending of Sandwich Sheet with Pyramid Core”, Steel Research International, 81(9), 797–800, 2010.
  7. S.U. Lee, D.Y. Seong, D.Y. Yang, “Compressive Behaviors of a Sandwich Plate with Structurally Stiffened Pyramidal Truss Core”, Steel Research International, accepted, 2011.
  8. J.C. Park, D.Y. Seong, D.Y. Yang, M.H. Cha, “Development of an innovative bending process employing synchronous incremental heating and incremental forming”, Steel Research International, accepted, 2011.
  9. D. G. Ahn, G. H. Nam, D. Y. Seong, G. Y. Han, D. Y. Yang, “Low–velocity Impact Response of a Thin Sandwich Plate with a Metallic Sheared Dimple Core Subjected to a Free Boundary Condition”, Mat. Sci. Eng. A–Struct., accepted. 2011.
  10. D. Y. Seong, C. G. Jung, D. Y. Yang, W. J. Chung, “Efficient Prediction of Local Failures for Metallic Sandwich Plates with Pyramidal Truss Cores during the Bending Processes”, International Journal of Precision Engineering and Manufacturing, 12(3),491–503, 2011
  11. D.Y. Seong, C.G. Jung, D.Y. Yang, G.H. Nam, D.G. Ahn, “Bending behaviors of metallic sandwich plates with a sheared dimple core under simply supported loading”, Journal of Sandwich Structures and Materials, 13(4), 445–466, 2011.

International Conference Papers

  1. D.Y. Yang, D.Y. Seong, “Integration of Numerical Methods and Analytic Approaches for Effective Solution of Metal Forming Problems”, conference proceedings of Numiform2010, Plenary Lecture 5, 2010.
  2. D. Y. Seong, C.G. Jung, D.Y. Yang, W.J. Chung, J.H. Kim, “Design map of bendable metallic sandwich plates for U–bending”, conference proceedings of Asiasteel2009, 2009
  3. D. Y. Seong, D. Y. Yang, C. G. Jung, W. J. Chung, “Efficient Prediction of Local Failures for Metallic Sandwich Plates with Pyramidal Truss cores”, International symposium on plasticity, 2009
  4. D.Y. Seong, C.G. Jung, D.S. Shim, D.Y. Yang, J.H. Kim, W.J. Chung “Failure Modes of Metallic Sandwich Plates with Pyramidal Truss Cores during U–bending”, conference proceedings of ICTP2008, KOREA, pp. 1095–1100, 2008.
  5. D.Y. Seong, C.G. Jung, D.Y. Yang, “Computationally Efficient Finite Element Analysis Method Incorporating Virtual Equivalent Projected Model For Metallic Sandwich Panels With Pyramidal Truss Cores”, conference proceedings of Numiform2007, Portugal, pp. 949–954, 2007.
  6. D. G. Ahn, G. H. Nam, S. H. Kim, G. Y. Han, D. Y. Seong, D. Y. Yang, “low–velocity impact behaviors of a deformable thin metallic sandwich plate”, 18th international conference on composite materials, 2011
Back to Top